wtf walker concreting

It’s been a while

Been a while since I’ve a written up anything on here apart from reports on work completed.

Man, this year has been a slog. I’ve personally managed to work through personal problems that have only surfaced (or more to the point), been managed properly since I was a kid. I’ve seen people going out of business, workers selling all their tools screaming “I’m broke, help me help me!”, yet seen the same old true, good quality contractors getting busier and busier through these times of economic down turn.

For better or worse, here we all still are with our complaints and our happiness all completely contradicting each other as per what our own personal path is allowing us to follow. Ultimately, regardless of whether you’re broke or begging for JUST ONE SINGLE FUCKING DAY OFF, we’ll all be here when it’s done and forget about this very quickly, as everyone has done since the last economic downturn…..the GFC.

What a lot of people won’t know about me, is I started my business about 4 -5 years before the GFC started to take effect in the USA initially, of which I took not a lot of notice through being a little…unconditioned to what a downturn actually is. Before I knew it, green little me was nearly $100K in debt after some bad business transactions chasing the dragon and ultimately claiming bankruptcy. Fucking drag.

For all you lads / gals that are too young to have experienced that 1/100 years down turn, I forgive you for not knowing what you’re getting into, but to all the others who did experience this downturn and are now sitting here whinging because you have no work, no money, or someone is charging pennies for their services, or anything else, shame on you, learn your fucking lesson and stop the bullshit, you’re to blame. Prepare ffs. It’s not rocket science.

If you take the 2 seconds to realise, even in good times, these morons are charging pennies for their services. These tradespeople come and go as quick as it takes to put an ad in the Trading Post (yes, I’m that old school I remember when this was the only advertising really available), stop worrying about the “others”. Focus on yourself and your own growth within your chosen industry of expertise.

Here’s a few lessons in concreting to anyone who wants to listen to someone who has seen most of what the industry has to offer.

1: Get good at what you do.

  • Not pretending you’re good during good times, putting your hand out for top dollar as a concrete finisher when you couldn’t finish your 12 yo self in the shower with fucking soap. (We see straight away what you are, stop talking shit).
  • Take the time, even for free if the option comes available, to learn high skills in the trade. I offered a labourera few weeks back to help with barrowing, for $150 / 2 hours work, then, welcome to sit through me finishing some very high end work and asking any questions they wish…..he barrowed in, washed tools, got paid and fucking left. This is the finish I completed, quite literally, (without blowing my own horn), 20+ years of experience and knowledge, of which they simply walked away from and didn’t care to get more knowledge (to earn a better pay). I bet this guy will be complaining next down turn how he’s worth more money…..

Yeah  yeah, guilty as charged. That was a shameless plug for a job I completed. But, I am more than willing to put my work in front of my peers and have it judged. Feel free to check the following link for what my fellow professionals have to say (if you’re a part of that FB page).

But I digress……

2: Forget the profit margin

  • This is the first part of contracting. Once this has been quoted on and price supplied to the client, apart from a few changes if needed for changes in scope of works, live and die by your price.
  • Under charge? Over charge? Whatever. It’s contracting, you win some you lose some. In the end, if you’re not a complete moron, you will end up ahead of the game, kind of like poker I suppose.
  • Once this price has been worked out, do you absolute best, as often as you can to provide good quality work. Structurally secure, quality finishing and basically as good as you can give your client who is paying you their hard earned savings. Yes, that’s right, your client has also earned their money as hard as you, respect that shit, or fuck off and go work at Maccas.

Fark. Too many brews on a Friday night.

………….You know what….My daughter just walked in the door after I’ve just finished another 70 hour week trying desperately to stay on top of our 3+ month forward work schedule. It’s been a big week and tomorrow is yet another work day and my family comes first as much as I can put them there, which is all too infrequent to be fair.

I didn’t get through anywhere near what I had in mind for this post, but if you haven’t got the gist of this shit by now, even through limited context, you’re probably well short of learning by using your ears anyway, try bashing your chest and throwing shit at the walls, see what sticks.

This industry, if you try hard enough, will drive you to alcoholism, put your Bipolar and ADHD into swirls of madness that seem uncontrollable…..but those few, brief moments of the year when everything comes together and you do something that honestly, few people in this world can do to perfection,  man it feels good…..beyond comprehension.

If you’re in this concrete game, regardless of what society tells you that you are, strive for perfection and show the world what it was once like to be a sculpture and create something from stone that other people stand back from and admire.

I’ll leave this (somewhat random and drunkenly abhorrent post), with some more shameless self promotion. Give us a call today for your higher end projects, we’re the real deal and I’ve got the fucking scars to prove it.

Concrete Colour Sealing Mermaid Waters
Warranty Repairs Jacobs Well
modern stone
minor stone
Epoxy Metallic Gold Coast
Custom Stone Resurfacing Gaven
Multi Tone Stain Stamped Tallai
Exposed Concrete Driveway Runaway Bay
Concrete Resurfacing Runaway Bay
Concrete Resurfacing Gold Coast
Warranty Repairs Jacobs Well

Warranty Works

Project Description

Location: Jacobs Well
Project Size: 60sqm

“You can’t accept your wins if you can’t wear your losses.” – Me 2019

I’m a big believer that business is all about the ups and downs. We work the hardest of making sure that the up’s are much more frequent than the downs, but of course, the downs are never that far away. The main thing, is that working just as hard on the downs as we do on the ups, turns those downs also into ups. I swear that just sounded like “Cat in the Hat” reading that back to myself….

This project here is a project we got under way around October 2018. A package deal for our clients with installation of side paths and driveway in plain grey concrete, then returning to decorative resurfacing or overlay the concrete to something pretty and fancy for this up market area in Jacobs Well.

The time came to install the concrete and a brief look at the weather had Mr Weather Man predicting 20% chance of 1-5mm of rain. Having been in this industry for 20+ years, a little rain here and there is certainly nothing that frightens us, especially considering we’re resurfacing later. At worst, it will just cool the afternoon down a bit on an already scorching days work.

However, as we got to final finishing, a big purple headed monster flew over the mountains with bright red eyes and horns of fire and instead of the 1-5mm of rain which would have seen my lovely niece in her gumboots splashing around, we were getting spears of pure evil pelted from the heavens at near horizontal angles seeing us racing for cover behind the other side of the house praying that the wall didn’t fall down.

10 minutes. That’s all it was, but it was enough to wash all the surface off our newly installed concrete and saw me kicking construction hats down the street swearing at Thor and his horrible temper that he just threw my way.

But, we are professionals and the show must go on.

We returned in November to start resurfacing works. I took to the concrete with my grinders, hoping to remove any unwanted wash that was sitting on the surface and wouldn’t prevent a solid bond of our new resurfacing products. I then acid cleaned the bejingles out of it and pressure washed everything off until I had nothing but pure stone to contact bond to when resurfacing.

After completing the resurfacing and taking all precautions I could, I walked away knowing that my years of experience has again gotten us out of a tricky situation….or so I thought.

Our client here got back in touch with us April this year, about 4-5 months after we finished work there. They just let us know that there were two cracks in the concrete that they would like me to look at.

Now one of these cracks, was just an unfortunate, non-structural crack that was only a hairline and being held together nicely by the steel reinforcing. Sucks that it’s there, but nothing more could be done. However, the bottom crack, was right next to the joint and looked pretty shitty. After some closer inspection, I could see that it was another control area that had basically gotten some unwanted materials in there, and, over the past 4-5 months, had began to let go in a straight line, more installation error than faulty product.

Now I had two choices here, licencing and warranty terms only dictate that I need to repair the damaged area, which would have been a pretty easy process considering it was only a small area, but I wanted to go the extra mile here and grind off the entire surface of the concrete and resurface again for two reasons.

Firstly, I wanted to make sure there weren’t any other areas underneath our resurfacing that I had missed in the original process that would fail later on down the track for our clients. I want our clients to have a long lasting solution for their concrete, not just a pretty coating that comes off if you step on it too hard.

Secondly, I know that if I just grind back and repair and resurfacing that particular section, in the position where it is, the new colour I put next to the old colour is going to look different. Over time, the two colours would blend back to each other, but these are good clients here and I want them to have the job they paid for.

So after a few days swearing and kicking behind the floor grinder, dragging my ageing ass over the concrete to hand grind the remaining bits, repairing areas, acid and pressure cleaning again, double base coating with modified product for fullness, then finally re-spraying, our clients again have their beautiful driveway back to pristine condition and not only looking fantastic, but I also modified the products that I used making them stronger and more effective…..lets see this little sucker let go now, I dare you.

Now, we’re only a small operation, literally me, my wife and the odd sub-contractor. Finding time to complete warranty works, especially with what was required here, is very difficult. I explained to our clients here to please be patient, gave them an outline of what I would be completing whilst asking them to be patient about the overall time frame. We finished their respray over a 3 week period, leaving them full access on the driveway throughout the duration except for the last 2 days (yesterday and today), when the final coatings went down.

If you’re reading this Geoff & Val, thank you for your patience  in waiting for repairs, along with you respect and trust that we are professionals and only want the best results for you, along with you overall business. It was a pleasure working with you.

Colours Used
White base with Natural main colour, Blue Mountain borders and control inserts with White and Blue Mountain Flecking

Project Photos

Warranty Repairs Jacobs Well
Warranty Repairs Jacobs Well
Warranty Repairs Jacobs Well
Warranty Repairs Jacobs Well
Warranty Repairs Jacobs Well
Warranty Repairs Jacobs Well
Warranty Repairs Jacobs Well
Warranty Repairs Jacobs Well
Warranty Repairs Jacobs Well
highlight stone

Our Artistic Approach


It’s been a while since I’ve put an article on the website that is written with the intention of more “insight” into what we do, as opposed to being strictly business related explaining projects completed and services rendered.

We have a period at the moment where it seems to be public holiday after public holiday. That, coupled with the constant rain this time of year, finds me with a little free time to write up a more personal article.

I’ve got a bit of a strong philosophy with my creations. I don’t believe, when we are spray resurfacing or applying an epoxy coating, that attempting to “re-create” a natural finish is being truly accurate to the situation, nor being truly honest with our clients.

The problem with providing, (for instance), a “Sandstone” finish for a client with our spray on resurfacing products, is that that finish is directly compared with a true Sandstone tile finish. This is not what we’re after. I don’t want to replicate a true Sandstone finish, because if you’re after a true Sandstone finish, then head down a different path and install Sandstone tiling.

What I try to achieve, is a take on a Sandstone finish. Whether it be a modern take, a pastel conversion, or a complete contrast application with the same principles, but trying to create a something with true WOW factor.

We separate our pricing into three different catagories. These catagories are affected directly by the amount of time and effort it takes to apply them, plus also the creativity and foresight to find the right “feeling” for the design.

Let me explain roughly the differences.

Base Pricing - Standard Works

These designs can be considered the bread and butter of both spray resurfacing and epoxy coatings. They’re technically nothing special and can be applied by most applicators / artists.

I do have a saying though, “There is an elegance in simplicity”.

Spray - Single Colour

Concrete Resurfacing Ormeau

Spray - Borders

Concrete Resurfacing Ormeau

Epoxy - Flake Flooring

Epoxy Garage Helensvale

Epoxy - Single Colour

revamp holmview

Midway Pricing - Little More Detail

These designs can still be relatively considered standard, but due to the extra workmanship required to complete them, incur extra costing. I suppose the extras come in the detailing required in the patterning and centre pieces to fill empty space a little more effectively over larger areas.

Spray - Offset Tiles

Off Set Tile Resurfacing Eagleby

Spray - Extensive Detail

Concrete & Resurfacing Oxenford

Epoxy - Simple Blending

epoxy sample board

Epoxy - Overtoning

contrast overtoning

Premium Pricing - Full Detail

These are examples of our premium custom designs. We put everything we have, both artistically and physically into these creations and leave nothing wanting. These designs are very time consuming and are applied with all of our 20+ years of experience.

Just keep in mind though, due to the time consuming nature of these designs, there is an area limit to what can be completed in a single section. They are physically and mentally exhausting to complete.

For larger areas, stop points need to be created and these stop points may have variation in colouring between them, only slight, but natural pigment products very rarely produce the same result day after day.

What we do in this situation, is try and create start / stop points in areas of no interest. Meaning, at the side of the house where nobody really looks, as opposed to the front door where it’s the first thing you see when you walk onto your patio.

Apart from all that, these designs are truly one off pieces of art work and will never be 100% recreated twice anywhere. If we were a little more of a narcissist, we’d even sign our work at the bottom…but that’s a little rude.

As you can see, what we’re looking for with the designs is not a re-creation of a natural application so much, but a feeling. We want to install a “theme” if you will.

I love what we’ve done so far in our journey, we hope you do too.

Sand in your Toes

resurfacing walker concreting

Ocean Dreaming

resurfacing walker concreting

Stormy Skies

modern stone

Volcanic Stream

Epoxy Metallic Gold Coast

Volcanic Implosion

Epoxy Metallic Gold Coast

Marble(ish) Constrast


Epoxy Design Explanations

Epoxy Flooring

Base Standard Examples

Considered standard installation procedures

Flake Applications

Epoxy Flake Floor Ormeau

Flake Applications

Major concrete refurbishment works resurfacing and epoxy Robina Gold Coast

Flake Applications

Epoxy Garage Helensvale

Flake Applications

Epoxy Garage Helensvale

Single Colours

Custom Decorative Concrete Installation Ormeau

Single Colours

Single Colour Metallic

Single Colours

single epoxy

Single Colours

revamp holmview

Premium Metallic Examples

Installation of metallic epoxy systems to custom suit the area and create a truly one off piece of artwork for your floor.

Metallic Epoxy Concrete Upper Coomera
Custom Decorative Concrete Installation Ormeau
Epoxy Metallic Gold Coast
contrast overtoning

Spray On Design Explanations

Spray On Concrete Resurfacing

Standard Pricing Examples

Simple designs. Predominately single colours.

Single Colour

Concrete Resurfacing Ormeau

Simple Decals

Concrete Resurfacing Coomera

Simple Patterns

Backyard Transformation Benowa

Midway Pricing Examples

Typically combining several simple designs which require a larger degree of workmanship and / or multiple colours.

Multiple Inserts / Colours

Concrete & Resurfacing Oxenford

Offset Tiles

Concrete Resurfacing Tallai

Border and Tiles

Concrete Resurfacing Runaway Bay

Different Colour Borders

Smashed Avocado Ormeau

Colour Borders / Internals

Warranty Repairs Jacobs Well

Premium Pricing Examples

These are our premium, one off designs where we explore our creative, artistic side and we can both contribute to a one off piece that is truly unique. Utilising spray techniques, skip trowel and micro topping overlays, along with full through colouring and staining. These are all custom jobs and one of a kind.

Desert Dreams

Custom concrete and resurfacing Upper Coomera Gold Coast

Stormy Skies

Custom Decorative Concrete Installation Ormeau

Stockholm Stone

Custom Concrete Resurfacing Stockholm Slate

Stone Stairs

Custom Stone Resurfacing Gaven

Grey Tone Colour Flips

Concrete Resurfacing Coomera

Sandstone Colour Flips

Concrete Resurfacing Ashmore

Metallic Epoxy – A Discussion


I’m sitting here over the weekend with what little free time I have and I stumbled upon a Facebook post discussing metallic floor installations between other contractors.

Now I hate Facebook, it’s a necessary evil for me with the business and I’m sure there’s lots of good content on there, but it’s just not my thing getting involved in conversations there.

There’s a contractor whom posted a project that he had completed, I think it looked fantastic. Unsure of the exact process of course, I can see smooth transition of the main colour into the base colour creating a nice, blended two tone appearance.

This was one of his early attempts with metallic epoxy, and although he said he was happy with the appearance, he stated he was unhappy with having foreign objects lodge themselves in the final result beyond his control, along with a few small other imperfections. He also wasn’t sure whether he was confident providing this line of work to client who would be expecting perfection.

I stepped in at this stage. As I said before, I hate having conversations over Facebook, but a few things needed to be made clear about metallic epoxy, of which I’ll go into in detail during this post.

Credit: Mark Fautley


I haven’t asked permission to use this image Mark, if you wish it removed, I will do so immediately.

The Right Frame of Mind

Metallic epoxy is artwork. Artwork that is hand crafted by a human being. Human being’s have flaws and faults, we are not perfect no matter how hard we strive to be. These faults come to the forefront through creation of anything that is not perfected with robotics….frig, even then things have little faults in them.

It is in those flaws and imperfections that true beauty is created.

Without being pretentious, I challenge you to look upon the Mona Lisa and tell me there isn’t at least a flaw or two within the brush strokes of that wonderful man Leonardo da Vinci’s masterpiece.

Don’t get me wrong, in no way am I comparing any of our work to anything near the masterpiece’s da Vinci created, it’s just a theory of thought of course.

When installing a custom metallic epoxy floor, we, as the installers (or more to the point artists), are creating something that we are seeing within ourselves and our mind’s eye of which we see matches and blends with the area / surroundings with which we have to work with.

Things like a little a fly that fell into our 100sqm fully customised floor we just installed, or a few small air bubbles caused by the chemical reaction of the products we’re working with, these things only create more beauty to the masterpiece.

They tell the onlookers that this was created by human hands, with love and passion and the installer has given his or her all to express their feelings and emotions into something so special, that you will never see two of the same floors anywhere in the world.

Example Of Thought

For me, this was my latest creation, at my own home for example.

Is it the most perfect work I’ve ever done? Absolutely not.

Is it the perfect colouring matching each tone of the inspiration I acquired to complete this floor? Not even close.

Is there a little bit of foreign matter in the finish and a few spots where blistered occurred and things could have been done better? Hell yes there, I’m HUMAN!

But I put my heart and soul into re-creating a feeling that I gained through light and dark contrasting, yet blending seamlessly at the same time, which gave me strength and helped me feel positive in this unforgiving world we live in.




Depth in Design

In Closing

For me, I’ve done a relative amount of travelling. When I travel, I try to intricately delve into the foreign culture and experience the heart and soul of where I am. Am I the most experience traveller out there? Heck no, I haven’t touched a finger print on this earth really yet.

But one place I’ve been to which completely captured my heart forever. Japan. the country itself was absolutely amazing, but it was the people, the culture and the frame of mind (with everything they do), that really drew me in.

One celebrated train of thought, which is evident throughout travels in Japan if you look close enough, is

“Wabi-sabi – The Celebration of Imperfection”

The actual train of thought may not be 100% in line with creating a flamboyant metallic epoxy installation, but the thought process that not everything needs to be 100% perfect, is inspiring to me.

If you’re after a metallic epoxy installation, through me or another fine artist applying their minds eye to your project area, accept the fact that you will find imperfections if you get down close and look hard enough.

Hell, some might be blatantly obvious.

But if you can stand back, admire the blending of the colouring, the workmanship that has gone into your project, and hopefully find a feeling that coincides with your installer, then you’re job is a one of a kind and an amazing piece of artwork that should be cherished.

Depth in Design

Passion in Depth

I’m sitting here this afternoon tired. I’m literally on my 17th day straight at work. The rain we’ve had, followed by an excessive work load, has left me with little energy for free time and a zombie like outlook on the world trying desperately to figure out whether I should rest my weary body, or feed my creative freedom (of whom my wife calls a “little smeagol”) with something lavish in my garage (of which I’ve used as a canvas for hundreds of epoxy creations testing what I can create).

I thought a few beers might help me rest. Now I like those big frigging half litre Asahi beers straight out of Japan. You know, the full strength fuckers that knock you on your ass after two when finished a hard day in the sun.

So here I am, 4 fulls in, staring up at the sky and pondering the days to come…..

We’ve had a cyclone come through up north in the last few days. This has left us with more rain of course, but it’s been scattered, only coming in waves every now and then. Then I look a little closer. I see it. More to the point I feel it. The contrast of storms and madness blended into a back drop of bright blue skies and twinkling sunshine, almost like mother nature was talking to me directly.

I’m inspired. I have energy pulsing through my veins that I really fucking shouldn’t have. I’m exhausted. I should be passed out on the couch like the old man I am dreading the alarm going off at whatever ungodly hour to wake me for more torment tomorrow.

But no. It’s time. To finish my own garage……3 years late.

Custom Metallic Epoxy Floor Robina

You see, I’m fresh off a custom Epoxy Project down at Robina (see pic above). My Confidence is high. I’m a confidence driven person.

I’m so freaking keen with the direction I’m heading in at the moment that being tired and weary will not stand in the way of my back flipping fucking brain coming up with rediculous ideas of creation with my chosen profession.

Oh my god. I’m inspired. I’m actually completely devoted to something for the first time in my life.

Not just for a pay cheque, fuck the money. I’m not a money person. I need inspiration and a sense of achievement and I get it directly from colour pigment on my hands and a slide on spiked boot.


What I’m working with here is the basic colours that I can get to match my house design. I’ve got a brick home and have completed the driveway with Almond colouring (which needs re-doing because I keep spilling bloody colour pigments on it grrrrr). But what I’m inspired by is the depth in the first photo I put up in this blog.

I need depth in my life. I was thinking originally about a semi marble like design, moving away from black and using a Brass instead. But…that’s not going to suit my house. My house / property is a homely property. It’s not heavily contrasted, relying more on natural appearances and tones.

Also the image that caught my eye earlier. The contrasted depth of tones in the afternoon sky with the storms around. Somewhat calling to me to re-create in colour tones that suit my house.

So I’m going to work depth through my creation with a white base and platinum white, old brass and carbon dust naturally blended together to re-create that afternoon delight for my eyes.

Now, every creation with metallic epoxy is a once off creation. No two designs are the same anywhere in the world. Frigg, even if I try to get it exactly the same, I feel like I stuffed up and failed….then I see what the new design is I created and immediately feel a sense of achievement having toppled the old winner of “best design in Ben’s head” award that appears to be excessively easily given out.

So here it is. The colours may not be the same as that lovely afternoon experience I witnessed yesterday, but the creation of depth between light and dark contrasts and how they flow for the overall design at least re-create a feeling that I saw that one afternoon at the end of February, full of beer and optimism for the year ahead .

Thanks for reading.

Depth in Design
Depth in Design
Depth in Design
Depth in Design

Lessons Learnt A New Year Awaits

What a year we had last year!

I made a conscience design to effectively grow the business last year, handing my website and marketing over to a 3rd party company and reaping the rewards of what I sowed.

On paper, everything was fantastic.

In reality, it was only a lesson learnt to pull the reigns in again.

You see, I have focused my business throughout on quality over quantity, always taking the stand point of making sure the workmanship and quality of materials is first class, then worrying about the exact profits later.

However, I fell into the all too common contractor trap of just taking on as much as work as I can, putting in 60+ hours on the tools each week to keep up, then wonder why not only the quality started to drop away, but also the back end of the business effectively failed completely.

Now don’t get me wrong, my quality of work towards the end of the year was still quite acceptable, but mistakes were creeping in that not only cost money in repairs, but also kept me up at night kicking myself and just begging for the year to end (end of the current workload), so I could step back, re-evaluate everything and get back on a more solid path.

I took 3 weeks off at the end of the year. For the first time in what seems like a decade, I actually switched my phones and computers off and simply just took time for me and my family without any concern for what work had to offer.

This was the absolute best thing that I could have done, not only for my business, but also for my mental health and well being.

You see, I’m not a live to work kind of person. I’ve had my business since my early 20’s and have always strived to be better in life, but I have always been well aware that I am only on this earth once and if I lose myself in work too much, I’ll miss the journey along the way.

Last year for me was a great milestone to reach. I finally discovered exactly what I could earn and achieve, as well as having the negative aspects blatantly slap me in the face to bring me back to reality.

So the year to come and hopefully the remainder of my working career….


I’m going back to basics. I will maintain the good marketing that I have put in place and continually strive to better my business, but I have also decided to set very specific working hours and anything outside of those hours, see’s my phones and computer turned off, my tools packed away and me spending time with loved ones and activities outside of the work place in general.

This will also see me going back to basics of one job at a time, done properly. Something I’ve always been a fan of.

I start a job, I finish that job 100% to satisfaction, then move onto the next project.

This is going to see some clients having to wait a fair amount of time for my services, but not only will it put my mental well being back on track again, it will also see my much more refreshed and able to provide my clients with the quality of workmanship and customer service that has seen my business thriving and receiving 5 star reviews in for the past 15 odd years.

I’m really looking forward to what this year has to come and I feel refreshed and enthused to grab the bull by the horns and get back to the basics that have seen my business successful throughout.

If you’re after a quote or a new client, I look forward to seeing your work. If you’re a client who has had work completed by me previously, thank you for your business and I hope you all had a great end of year break.

Cheers to a new year ahead.

revamp stamp

Revamp Your Stamp

Miles and miles of stamped concrete on the Gold Coast. A highly popular finish throughout the 80’s and 90’s that fell away after that because, bluntly, no body EVER looks after their decorative concrete finishes properly!

Because all this stamped was placed, then never re-sealed throughout it’s life time, the process of erosion removes the colour, starts to delaminate the finish and basically makes everything go to shit.

There’s a few options that we have to revamp your stamp, with the most common (and cheapest), being a tint sealing. I’ve discussed this option in another article, but basically, it’s an epoxy colour tint that is added to the high grade acrylic sealer and basically “painted” onto the surface, allowing the sealer to penetrate and giving a “painted appearance” to the surface. Although this finish is fine, and often the only option available, there is a better option….an option that brings stamped back to it’s former glory, but, requires a skilled applicator to get it right.

It’s a custom stain process that requires mixing and blending of base line stain colours to allow the new colours to work with any existing dual colours that are still on the surface of the old stamped concrete. After this process is complete, the colours are applied in a custom fashion, blending as we go to create a unique, multi tone appearance that not only brings the stamp back to its original flavour, but if I can say so myself, looks like a brand new custom design.

I’ll just leave two before and after pictures to give you an idea of what we can create. That old stamped is never dead, it just needs some TLC by someone who know’s what they’re doing.

revamp stamp
revamp stamp
custom concrete

Concrete – Standard & Custom

Our grass roots, where it all began, is of course in concreting. Over 20 years ago I began in the industry, and in that time, there isn’t much I’ve put my hands onto to try and master. From basic paths and shed slabs, to intricate contrasting applications of exposed and stamped in full custom designs, it’s fair to say, there isn’t much I can’t handle.

I won’t go into too much detail for standard works in this section, as nearly everyone knows what they are. Plain grey, exposed aggregate, coloured…..if you’re after something standard, there’s no need to talk anymore, expect it to be completed to the highest standard.

But where I really like to delve into, goes hand in hand with my other decorative applications I provide for resurfacing options. I love mixing things up. I’ve never been scared to take a risk. Instead of a single colour throughout, lets do different coloured sections. Let break that exposed driveway up with different coloured stone inserts for something a little different. Lets border that exposed driveway with an intricate stamped design border or pathway leading off from it.

Basically, I love different. Different keeps my brain involved and keeps me striving to set new standards within the industry.

Here’s a couple of pics of what can be achieved by thinking outside the box. Give me a call today to have a chat about your new concrete installation, and instead of of just getting an exposed driveway completed, lets get a custom exposed driveway completed that sets you apart from the rest of the crowd.

Contrasting Exposed Aggregates

custom concrete

Colour Concrete w/ Stamped

custom concrete

Stone Tile Border w/ Exposed

custom concrete

Exposed Aggregate w/ Stamped

custom concrete